ASTM A420 WPL6 Elbow ASME B16.9, Low Temperature Fittings

CN ASTM A420 Specification.pdfDownload

Detail

Product Item: 90 Degree Elbow
Material: ASTM A420 WPL6
Size: 3 Inch
Thickness: SCH STD
Standard: ASME B16.9

Low Temperature Carbon Steel Fittings

ASTM A420 WPL6 Elbow ASME B16.9 — ASME B16.9 3” SCH STD ASTM A420 WPL6 Elbow Dimension Measurement

ASTM A420 WPL6 Chemical Composition

C	Mn	Si	P	S
0.3	0.05-1.35	0.15-0.4	0.04	0.03

ASTM A420 WPL6 Mechanical Properties

Tensile Strength	Yield Strength	Elongation
415 – 655 (Mpa)	240 (Mpa)	30 (%)

ASTM/ASME SA420 WPL3 WPL4 WPL5 WPL6 Low Temperature Carbon Steel Fittings

ASTM A420 WPL6 pipe fittings elbows are a kind of butt welding pipe fittings, they are commonly made from the steel pipes of ASTM A333 Grade 6. This material should pass the Charpy V impact test in temperature of -46℃ to make sure it can work in a lower temperature service, such as in cold weather, winter or deep sea water offshore projects.

ASTM A420 WPL6 Buttweld Pipe Fittings elbow is subjected to radiographic examination, hydrostatic test, etc. to improve the quality of the product. This pipe fitting is packed in a wooden box or case to avoid damage. This is used in many applications like petroleum, machinery etc and it is available in accurate dimension, durability and other features.

SA 420 WPL6 Elbow Specification

Fittings Type	Seamless / Welded / Fabricated / A420 WPL6 Weld Fittings
Material Size Range	½” NB to 120″ NB, Seamless ½” to 24”, Welded ½” to 120”, Two Joint / Two Halve Fittings 6” to 48”
Pipe Fittings Dimensions	ANSI/ASME B16.9, B16.28, MSS-SP-43.
Fittings types	fittings, pipe fittings, Elbows, Tees, Reducers, Caps
Surface treatment	sand blasting, Sand Rolling, Sand Blasting
Applicable Standards for Pipe Fittings	ASME B 16.9 for large Bore FittingsASME B 16.11 for small Bore Pipe Fittings (socket welded)ASME B 16.25 for ASTM A420 WPL6 Buttweld Pipe FittingsASME B 16.28 for small radius A420 WPL6 Elbow
Bending Radius	R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Material ASTM A420 WPL6 Wall thickness	SCH10, SCH20, SCH30, STD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS available with NACE MR 01-75
A420 Gr WPL6 Technics	BUTT WELD / FOREGED
Other fitting Types	Reducer, Concentric Reducer, Elbows, Long Radius Elbow, Short Radius Elbow, Tee, Equal Tee, Reducing Tee, Cross, Bend, Long Radius Bends, Piggable Bends, Con Reducer, Ecc Reducer, Eccentric Reducer, Pipe End Caps

NOTES:
(1) For each reduction of 0.01% C below 0.30%, an increase of 0.05% Mn above 1.06% will be permitted, up to a maximum of 1.35%.
(2) A420 WPL6 Fittings made from forgings may have 1.35% max Mn.

Maximum Allowable Stress at Elevated Temperatures