C&N Industiral,huitong limtied is professional pipe,flange and fitting manufacturer,our products approved by PDO, SADARA, SWCC,PDO etc.
| We are one of the most quality conscious producers of the wide range of Aluminum alloy 5083 flanges The applications of alumimum flange are for Oxygen Making Equipment,Air Separation Equipment,Deep Cooling Equipment,Chemical equipment,HEAT exchanger, cooler, carburetor, intercooler, etc. Aluminum Flange Standards: ANSI/ASME Standard: ANSI B16.5, ANSI B16.47 Series A & B, MSS-SP-44, API 605, API6A in class 150 to 2500; AWWA C207 flanges in Class B, Class D, Class E, Class F, Ring, Blind & Hub; European DIN, UNI, EN 1092-1, BS 4504, ISO, NS, NFE29203 flanges in Pressure PN6 to PN100; Japanese JIS B2220 & Korean KS B1503 flanges in pressure 5K to 40K; Russian GOST 12820-80, GOST 12821-80, GOST 12815-80 in pressure PN0.6MPa to PN10MPa; South African SABS 1123 / SANS 1123 in Class 600kPa to 4000kPa. THE FOLLOWING ALLOYS ARE AVAILABLE FROM AMERICAN ALLOY FLANGE ALUM 1100 A91100 B/SB 247, B/SB 361 B/SB 211, B/SB 221 * ALUM 3003 A93003 B/SB 247, B/SB 361 B/SB 211, B/SB 221 * ALUM 5083 A95083 B/SB 247, B/SB 361 B/SB 221 * ALUM 5086 A95086 NONE B/SB 221 * ALUM 6061 A96061 B/SB 247,B/SB 361, QQ-A-367, * ALUM 606 A96061 B/SB 247,B/SB 361, QQ-A-367, AMS4127/4146 B/SB 211, B/SB 221 Alloys listed above are available from ½” – 50″ We also offer these grades from other mills and will not carry the ® registered brand. Please specify if your application requires specific mill melt sourcin |
Download ALUMINIUM ALLOY 5083 FLANGE FITTING PDF Version
ALUMINUM 6060 Flanges, Aluminum 6061 T6，Aluminum 6063 Flanges，Aluminum 7075 Flanges，Aluminum 3003, Aluminum 5086 Flanges are also available.
ALUMINIUM ALLOY 5083 FLANGE STANDARD SPECIFICATIONS
| Product Name | Aluminium 5083 Flange, PIPE FITTING |
|---|---|
| Size Range | 1/2″ (15 NB) to 48″ (1200NB) |
| Standard Size | DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN300 |
| Class / Pressure Rating | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Standards / Dimensions | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, BS, GOST, MSS SP-44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605 |
| Flange Face Types / Connection Type | Flat Face Flange (FF), Raised Face Flange (RF), Ring Joint Flange (RTJ), Lap Joint Flange, Male and Female Flange (M&F), Large and Small Tongue-and-Groove Flange (T&G) |
| Condition | Temper,Mill Finish, Anodized, Powder Coated, Wooden Finish, Polish O – Soft H111 – Some work hardening imparted by shaping processes but less than required for H11 temper H112 Alloys that have some tempering from shaping but no special control over the amount of strain- hardening or thermal treatment. Some strength limits apply. H116 Special corrosion resistant temper. H32 – Work hardened by rolling then stabilised by low-temperature heat treatment to quarter hard |
| Relate material | Aluminum:1070A,1060,1100,1200 ,2A11,2017,2A12,2024 ,3003, 3A21,5A02,5052,5A03,5A05,5A06,5083,5086,5454,6061,6063,6A02,6082,6005 |
| Material Test Certificates (MTC) | As per EN 10204 3.2 and EN 10204 3.1, Test Certificates certifying NACE MR0175, NACE MR0103 |
| Test Certificates | 100% Radiography Test Report, EN 10204/3.1B, Raw Materials Certificate, Third Party Inspection Report, etc |
| Tests | Hydrostatic testing machine, Direct-reading Spectrograph, UI trasonic flaw detector, X-ray detector, Magnetic particle detector |
| Equipment / Machines | Press machine, Pushing Machine, Bending machine, Sand-blasting machine, electric bevelling machine, etc. |
THE FOLLOWING ALLOYS ARE AVAILABLE FROM AMERICAN ALLOY FLANGE
Aluminum alloy 6061 flange
5083-O Aluminum Alloy slip on Flange
5083-O Aluminum Alloy Weld neck Flange
5083-O Aluminum Alloy Blind Flange
65083-O Aluminum Alloy socket weld flange
Aluminum Alloy 1100 Aluminum AlloyA91100 B/SB 247, B/SB 361 B/SB 211, B/SB 221
* Aluminum Alloy 3003 A93003 Flange B/SB 247, B/SB 361 B/SB 211, B/SB 221
* Aluminum Alloy 5083 A95083 Flange B/SB 247, B/SB 361 B/SB 221
* Aluminum Alloy 5086 A95086 Flange
* Aluminum Alloy Steel 6061-T6 Flange as per ASTM B247,B221
ALUMINUM 5052 Flanges,Aluminum 6063 Flanges，Aluminum 6063 T6 Flanges are also available.
AMS4127/4146 B/SB 211,B/SB 221
5083-O Forge flange
Aluminium alloy 6061 is a medium to high strength heat-treatable alloy with a strength higher than 6005A. It has very good corrosion resistance and very good weldability although reduced strength in the weld zone. It has medium fatigue strength. It has good cold formability in the temper T4, but limited formability in T6 temper. Not suitable for very complex cross sections.
Applications
Alloy 6061 is typically used for heavy duty structures in:
~ Rail coaches
~ Truck frames
~ Ship building
~ Bridges and Military bridges
~ Aerospace applications including helicopter rotor skins
~ Tube
~ Pylons and Towers
~ Transport
~ Boilermaking
~ Motorboats
~ Rivets
6061 – T6 Extrusions
5083 – ‘0’ – H111 Sheet and Plate
Aluminium 5083 is known for exceptional performance in extreme environments. 5083 is highly resistant to attack by both seawater and industrial chemical environments.
Alloy 5083 also retains exceptional strength after welding. It has the highest strength of the non-heat treatable alloys but is not recommended for use in temperatures in excess of 65°C.
Applications
Alloy 5083 is typically used in:
~ Shipbuilding
~ Rail cars
~ Vehicle bodies
~ Tip truck bodies
~ Mine skips and cages
~ Pressure vessels
Mechanical Properties shown are for 0/H111 temper
Chemical Composition
Spec: BS EN 573-3:2019
Alloy 5083
| Chemical Element | % Present |
|---|---|
| Manganese (Mn) | 0.40 – 1.00 |
| Iron (Fe) | 0.40 max |
| Copper (Cu) | 0.10 max |
| Magnesium (Mg) | 4.00 – 4.90 |
| Silicon (Si) | 0.0 – 0.40 |
| Zinc (Zn) | 0.0 – 0.10 |
| Chromium (Cr) | 0.05 – 0.25 |
| Titanium (Ti) | 0.15 max |
| Other (Each) | 0.0 – 0.05 |
| Others (Total) | 0.0 – 0.15 |
| Aluminium (Al) | Balance |
Properties
| Physical Property | Value |
|---|---|
| Density | 265 g/cm³ |
| Melting Point | 570 °C |
| Thermal Expansion | 25 x10^-6 /K |
| Modulus of Elasticity | 72 GPa |
| Thermal Conductivity | 121 W/m.K |
| Electrical Resistivity | 0.058 x10^-6 Ω .m |
Spec: BS EN 485-2:2008
Sheet – 0.2 – 6.3mm Thick
| Mechanical Property | Value |
|---|---|
| Proof Stress | 125 Min MPa |
| Tensile Strength | 275 – 350 MPa |
| Hardness Brinell | 75 HB |
Spec: BS EN 485-2:2008
Plate – 6.3mm to 80mm
| Mechanical Property | Value |
|---|---|
| Proof Stress | 115 Min MPa |
| Tensile Strength | 270 – 345 MPa |
| Hardness Brinell | 75 HB |
Spec: BS EN 485-2:2008
Plate – 80mm to 120mm
| Mechanical Property | Value |
|---|---|
| Proof Stress | 110 Min MPa |
| Tensile Strength | 260 Min MPa |
| Hardness Brinell | 70 HB |
| Elongation A | 12 Min % |
Alloy Designations
Alloy 5083 corresponds to the following standard designations and specifications but may not be a direct equivalent: :
GM41
A95083
AlMG4.5Mn
Al Mg4.5 Mn0.7
Temper Types
The most common tempers for 5083 aluminium are:
- O – Soft
- H111 – Some work hardening imparted by shaping processes but less than required for H11 temper
- H32 – Work harde
