C&N HUITONG limited are leading steel pipe,fitting and flange Supplier since 1997.
Phone: +86-0317-6287569     E-mail: alloypipefitting@gmail.com

Fasteners/

Xylan 1070 blue ptfe Coated Stud Bolt,xylan 1070 stud bolt

We are the PTFE Coated stud bolt, PTFE Coated hex bolt, PTFE Teflon coated stud bolts, PTFE Coated hex nuts manufacturer in China, C&N offers high quality of PTFE Coated stud bolt, PTFE Coated STUD BOLT A193 B7 with 2 NUTS A194 2H, ESPARRAGOS STUD BOLT A193 Grado  B7 w/2 NUTS A194 2Hstud bolts A193 B7  material according to ASTM A193/A193M , Thread as per ASME B1.1, 2A For the Hex Nuts A194 2H,material according to ASTM A194 , Threas as per ASME B1.1, 2B ASME B18.2.1 PTFE coated Stud Bolt ASME B18.2.2 PTFE coated Hex Nuts PTFE coatings/ PTFE Teflon coatings (Polytetrafluoroethylene) are non-stick, fluoropolymer, high temp coatings. They have a one-coat system or a two-coat system of a primer and topcoat and have several…

  • Product Details

We are the PTFE Coated stud bolt, PTFE Coated hex bolt, PTFE Teflon coated stud bolts, PTFE Coated hex nuts manufacturer in China, C&N offers high quality of PTFE Coated stud bolt, PTFE Coated STUD BOLT A193 B7 with 2 NUTS A194 2H, ESPARRAGOS STUD BOLT A193 Grado  B7 w/2 NUTS A194 2H
stud bolts A193 B7  material according to ASTM A193/A193M , Thread as per ASME B1.1, 2A 
For the Hex Nuts A194 2H,material according to ASTM A194 , Threas as per ASME B1.1, 2B 
ASME B18.2.1 PTFE coated Stud Bolt ASME B18.2.2

PTFE coated Hex Nuts

PTFE coatings/ PTFE Teflon coatings (Polytetrafluoroethylene) are non-stick, fluoropolymer, high temp coatings. They have a one-coat system or a two-coat system of a primer and topcoat and have several features that make them go-to coatings. This specific type of coating has the highest operating temperature of all fluoropolymers at 500°F, a low coefficient of friction, as well as good chemical resistance and abrasion resistance. Its non-reactive properties, due to strong carbon–fluorine bonds, makes this coating great for applications that must hold up against volatile and corrosive chemicals.we mainly make PTFE coating on the stud bolt, with Whitford Xylan® coatings. Xylan®1070/Xylan®1424

Polytetrafluoroethylene (PTFE) is a synthetic fluoropolymer of tetrafluoroethylene that has numerous applications. The well-known brand name of PTFE-based formulas is Teflon

PTFE is a fluorocarbon solid, as it is a high molecular weight compound consisting wholly of carbon and fluorine. PTFE is hydrophobic: neither water nor water-containing substances wet PTFE, as fluorocarbons demonstrate mitigated London dispersion forces due to the high electronegativity of fluorine. PTFE has one of the lowest coefficients of friction of any solid.

We can also provide other Surface treatment :black,galvanized,HDG,blue. FluoroCarbon Coated,PTFE Xylan 1070 blue coated stud bolt.PTFE Xylan 1424 ptfe coated stud bolt.

Whitford Quality Approved Coater Xylan 1070 Coated Stud Bolt, Xylan Coated Bolts, PTFE Fluorocarbon Coated A193 B7 Stud Bolt &A194 2H NUTS

Fluorcarbon coating / Surface Coatings XYLAN 1070. XYLAN 1014.

We can also provide Xylar 2 + XYLAN 1070  coated stud bolt & nuts

Diameter:1/4″~3 3/4″
Length:20mm~6000mm(usually 12 feet)
Grade :B7
Standard: M6-M100

Stud bolts, a term used for cut-to-length all thread rod, are used for: bolting together flanges, anchor bolting, as well as general fastening.

A 193 A193M B7 – This is the most common grade for which stud bolts are produced.  B7 is a Chrome-moly, Alloy steel that is made to AISI 4140/4142, and it is quenched and tempered.

XYLAN PTFE 1070 Coated stud bolt

Xylan 1070 is an Organic solvent based, low friction coating for fasteners with excellent corrosion resistance. These coatings are mainly applied on fasteners as top layer to act as a barrier coating with a base coat of electro zinc/phosphate or with other primer treatment to achieve good adhesion. These can used for an operating temperature of -195ºC to 260ºC continuously and -195ºC to 285ºC intermittently. Available in variant colours.

Xylan coatings have a broad range of properties which make them ideal for a variety of applications. Xylan differs from traditional Fluoropolymer coatings in one very important aspect  they are composite materials. Lubricants with the lowest-known coefficient of friction are combined with the newest high temperature resistant organic polymers to create Xylan  coatings. Together these ingredients form “plastic alloys” with unique properties.

We can supply xylan1424, xylan1425, xylan 1427, xylan 1070, xylan1014, xylan 1010, xylan 5230,  xylan 1052 xylar2, etc. coating on the stud bolts, hext bolt,hex nuts etc.

How do we make PTFE coated stud bolt?

PTFE coatings are applied over primers with HVLP spray guns. Different primers are used upon request from the customer.Please send mail for any PTFE coated stud bolt queries.

How to order BOLTS & NUTS?

Sample 1 :

PTFE COATED STUD BOLT

Stud bolt, 2 Heavy Hex Nuts, & 2 Flat Washers ;
1-1/8″ Dia. X 220mm LG ;
ASTM A193 Grade B7 & ASTM A194 Grade 2H ;
Fluorocarbon Coated (Xylan 1424 Blue  or Xylan 1070  blue)
OR 1-1/8″ Dia. X 220mm LG,

Sample 2 :

Stud bolt & 2 Heavy Hex Nuts ;
3/4″ Dia. X 100mm LG ;
ASTM A193 Grade B7 & ASTM A194 Grade 2H ;
Xylar 2 (Base Coated) + Xylan 1424 (Top Coated)

OR Xylar 2 (Base Coated) + Xylan 1070 blue (Top Coated)

Sample 3 :

PTFE COATED HEX BOLTS

Hex. Head Bolt & Heavy Hex Nut ;
M16 X 100mm LG ;
ASTM A193 Grade B7 & ASTM A194 Grade 2H ;
Fluorocarbon Coated (Xylan 1424 Blue or Xylan 1070  blue) 

click to preview more information:

Prev:

Next:

Leave a Reply

Leave a message