C&N HUITONG limited are leading steel pipe,fitting and flange Supplier since 1997.
Phone: +86-0317-6287569     E-mail: alloypipefitting@gmail.com

Copper brass/

C70600-Copper-Nickel-Seamless-Tube

 

Type : C70600 Pipe
Material :
Copper-Nickel BFe10-1-1 C70600 CN102 C7060 CuNi10Fe1Mn
Copper-Nickel BFe30-1-1 C71500 CN107 C7150 CuNi30Mn1Fe
Copper-Nickel (BFe30-2-2) C71640 CN108 C7164 CuNi30Fe2Mn2
Copper-Nickel (BFe5-1.5-0.5) C
Dimension :  1/2in to 120in CL150 to CL3000
Feature : O–Soft,H111,H112,H116,H32 treatment

 

  • Product Details
  • Packing & Delivery
  • FAQs

C70600 Pipe ASME SB 111 SB 466 C70600 Pipe | 90/10 Copper Nickel Seamless Tubes Tubing

We are well known Manufacturer, Supplier, and Exporter of Grade C70600-Copper-Nickel-Seamless-Tube. Copper Nickel C706 in bar, plate & sheet, tube, pipe, fittings, and flanges. Copper Nickel C706 is also known as Copper Nickel 90/10 because it is made up of 10% nickel or as ASTM B466 and ASME SB466. C706 is known for its moderate strength, weldability, and formability. The inclusion of controlled quantities of iron and manganese also give the 90/10 alloy an extraordinary resistance to general corrosion and stress cracking, These C70600-Copper-Nickel-Seamless-Tube are manufacturers using superior quality of raw material in accordance with national and international norms.

Brass
Family Principal alloying
element UNS numbers
Copper alloys, Brass Zinc (Zc) C1XXXX – C4XXXX, C66400 –
C69800
Phosphor bronze Tin (Sn) C5XXXX
Aluminum bronzes Aluminum (Al) C60600 – C64200
Silicon bronzes Silicon (Si) C64700 – C66100
Copper nickel, nickel
silvers Nickel (Ni) C7XXXX
For purposes of identification, copper and copper alloys are divided into characteristic
groups, each group determined by its composition, and referenced by a system of
three-digit numbers originally designated by the Copper Development Association, or
CDA. Today, these designations have been expanded to five digits, following a prefix
letter ‘C’, and made a part of the Unified Numbering System for Metals and Alloys (UNS),
which is jointly managed by the American Society for Testing and Materials
(ASTM) and by the Society of Automotive Engineers (SAE).
100 Series (C10000) Coppers
This group comprises the pure coppers, those with a designated minimum copper content
of 99.3%, for high electrical conductivity.Also included within this group are the high
copper alloys, those withcopper contents of between 99.3% and 96%; which contain
additionalalloying elements such as beryllium, cadmium,chromium, cobalt, nickel, or
iron forgreater strength without drastically reducing the electrical conductivity.
200 Series (C20000) Brasses
These are the basic copper-zinc alloys which feature ease of manufacturing while still
maintaining fair electrical characteristics. These alloys are excellent for drawing and
forming while still providing good strength.
300 Series (C30000) Leaded Brasses
These are basically brass alloys that contain an addition of 1 to 3% lead to provide greater
ease of machining, blanking, shearing, sawing, and milling.
400 Series (C40000) Tin Brasses
These alloys contain 1 to 2% of tin as well as copper and zinc to provide greater
corrosion resistance while maintaining strength. These alloys find many uses in electrical
applications such as contact springs, fuse clips, terminals, and connectors.
500 Series (C50000) Phosphor Bronzes

Copper alloys identify guidence click to get PDF of guidence of copper alloy

C70600-Copper-Nickel-Seamless-Tube CHEMICAL COMPOSITION

ASTM B466C70600C71500
Chemical composition
(%)
Copper(Remainder)Nominal 90%
Nickel (Ni)9.0~11.0%29~33%
Lead (Pb)0.05% max0.05% max
Iron (Fe)1.0~1.80.40~1.0
Zinc (Zn)1.0% max1.0% max
Manganese (Mn)1.0% max1.0% max
GradeUSAU.KGermanyJapan
China BGASTMBSDINJIS H
T 2C11000C101 / C102>E-Cu58C1100
TP 2C12200
C15000
C17200
BFe10-1-1C70600CN102CuNi10Fe1MnC7060
BFe30-1-1C71500CN107CuNi30Mn1FeC7150
BFe30-2-2C71640CN108CuNi30Fe2Mn2C7164
BFe5-1.5-0.5C70400
Material DesignationGB/T8890ASTM B111BS2871JIS H3300DIN1785
Copper-NickelBFe10-1-1C70600CN102C7060CuNi10Fe1Mn
Copper-NickelBFe30-1-1C71500CN107C7150CuNi30Mn1Fe
Copper-Nickel(BFe30-2-2)C71640CN108C7164CuNi30Fe2Mn2
Copper-Nickel(BFe5-1.5-0.5)C70400
Copper-NickelB7
Aluminium BrassHAL77-2C68700CZ110C6870CuZn20Al2
Admiralty BrassHSn70-1C44300CZ111C4430CuZn28Sn1
Boric BrassHsn70-18
Boric BrassHSn70-1 AB
Arsenical BrassH68ACZ126
Brass TubesH65/H63C28000/C27200CZ108C2800/C2700CuZn36/CuZn37

Nickel (Ni)9.0~11.0%29~33%9.0~11.0%
Lead (Pb)0.05% max0.05% max0.05% max
Iron (Fe)1.0~1.80.40~1.01.0~1.8
Zinc (Zn)1.0% max1.0% max1.0% max
Manganese (Mn)1.0% max1.0% max1.0% max

C70600-Copper-Nickel-Seamless-Tube STANDARD SPECIFICATIONS

Product NameASME SB 111 C70600 Pipe,
C70600 Tube,
EEMUA 234 UNS 7060X
Copper Nickel Alloy
Size RangeOD: 5-350mm, WT: 0.5-50mm, or according to the buyers requirements,
Standards / DimensionsANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, BS, GOST, MSS SP-44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605
StandardASME SB 466 SB 111 C70600 | EEMUA 234 UNS 7060X Standard Specification:
ASME SB466 Specification for Seamless Copper-Nickel Pipe and Tube
ASTM B111 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
BS 2871-2 Specification for copper and copper alloys. Tubes. Part 2: Tubes for general purposes
GB/T8890 Seamless Copper Alloy Heat Exchanger Tubes
JIS H3300 Copper and Copper Alloy-Seamless Pipes and Tubes
EEMUA 144 Specifications covering 90-10 Cu-Ni Piping for Offshore Applications are : Tubes Seamless and Welded Publication
EEMUA 234 UNS 7060X – 90/10 Copper nickel alloy piping for offshore applications (Incorporating EEMUA 144, 145 and 146)
DIN1785 Wrought Copper and Copper Alloy Tubes for Condensers and Heat Exchangers
DIN 86019 Seamless Tubes Made of CuNi10Fe1.6Mn for Pipes – Dimensions for Standard Tubes and Precision Tub
Relate materialCopper-Nickel
BFe10-1-1
C70600
CN102
C7060
CuNi10Fe1Mn
Copper-Nickel
BFe30-1-1
C71500
CN107
C7150
CuNi30Mn1Fe
Copper-Nickel
(BFe30-2-2)
C71640
CN108
C7164
CuNi30Fe2Mn2
Copper-Nickel
(BFe5-1.5-0.5)
C
Material Test Certificates (MTC)As per EN 10204 3.2 and EN 10204 3.1, Test Certificates certifying NACE MR0175, NACE MR0103
ApplicationCopper-Nickel Alloy tube for condenser and heat-exchangers, Water Evaporators, Boiler Blowdown Heat Exchangers, air coolers, Gland Steam Condensers, Steam Ejector, Turbine Oil Coolers, Fuel Oil Heaters, Compressed Air Inter and After Coolers, Ferrules, Oil Well Pump Liner, and Distiller etc.
TestsHydrostatic testing machine, Direct-reading Spectrograph, UI trasonic flaw detector, X-ray detector, Magnetic particle detector
Equipment / MachinesPress machine, Pushing Machine, Bending machine, Sand-blasting machine, electric bevelling machine, etc.

ASTM-B466-C71500-Pipes-Copper-Nickel-Tube-BFe30-1-1CuNi30Mn1FeCUNI-7030-cupronickel-tube-rotated
ASTM-B466-C71500-Pipes-Copper-Nickel-Tube-BFe30-1-1CuNi30Mn1FeCUNI-7030-cupronickel-tube-rotated
copper-nickel-C71600-tube
copper-nickel-C71600-tube

All our pipe fitting and flange shipped with proper packing protection, and our factory with good experience on special products like polished pipe packing ,FBE coated fitting and pipe packing, oversizes fitting up to 3500mm packing&shipping.

Common shipping and packing for our products

Item Producs   Dimension Surface Packing
method
Shipping
method
Remark
1 Flange below 60in varnish oil wooden case sea/air  
2 Flange over 60in varnish oil wooden pallet/steel frame sea/air For OD over 2.3m
3 Fitting below 24in varnish oil wooden case/pallet sea/air  
4 Fitting over 24in black painting wooden case/pallet sea/air  
5 Fitting over 24in black painting Nude packing Bulk vessel For OD over 2.32m
6 Pipe Below 8in bundle Woven bag/wooden case sea/air  
7 Pipe over 8in single piece Woven bag/wooden case sea/air  
8 Gasket all sizes   Cartons/wooden case sea/air  
9 Fastener all sizes   Cartons/wooden case sea/air  

Also we can fulfill customized packing and delivery requirements. some of our products packing pictures as below

Flange packing Flange packing Steel pipe wooden case packing

Pipe fitting pallet packing Forge fitting packing FBE pipe fitting packing
SPW gasket packing Steel pipe bulk cargo packing Steel frame packing
Steel pipe protection Customize products packing Customize products packing

Frequently Asked Questions

Easy to enjoy our service by scan the follow Frequently Asked Questions

Q: What kind of material does HONGCHENG supply?

HONGCHENG generally specializes in alloy steel and specialty alloys. Some of these specialty alloys include Alloy 20, Duplex Alloys, Nickel Alloys such as various grades of Hastelloy (C276, C22), Aluminum, Chrome Moly ASTM A/ASME SA 335 P1, P2, P5, P9, P11, P12,P22, P23, P91, and P92.
we also offer bending,CNC machining, coating service.

Q. What the define of pipe fittings?
Pipe fitting is the occupation of installing or repairing piping or tubing systems that convey liquid, gas, and occasionally solid materials. This work involves selecting and preparing pipe or tubing, joining it together by various means, and the location and repair of leaks.
Pipe fitting work is done in many different trades: Plumbing, HVAC, manufacturing, fire prevention, and many others. Pipe fitters (sometimes called simply “fitters”) are represented in the USA by the United Association of Journeymen and Apprentices of the Plumbing and Pipe Fitting Industry of the United States and Canada.
Fitters work with a variety of pipe and tubing materials including several types of plastic, copper, steel, iron, aluminium, clay, and lead.

Q. What should I consider for buying pipe fittings?
A. Material, Size, Temperature and Pressure Ratings, Durability, Standards,surface coating etc.

Q. What are threaded fittings?
A. Thread fitting is the fitting with thread concetions,the regular screw standards are NPT and BSP.NPT is a U.S. standard for tapered threads used to join pipes and fitting and BSP is a family of standard screw thread types that has been adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.

Q. The define of flange?
A. A flange is usually in the shape of a plate or ring which forms a rim at the end of a pipe when fastened to the pipe our factory can produce single forge base over 8000kg.

Q.Do you provide Material Test Reports (MTR’s) ?
Relevant documents according to inspection test plan will be provide along with goods.

Q.What is a standard used in pipe fittings?
A. Standards are certain authentication given in reference to manufacture and installation of the product . Some common standards are BSP, NPT, ANSI, ASME etc

Q. My questions is not answered in this FAQs section, what do I do now?
A: Simply call us or email us at info@alloysteelfitting.com and we will do our best to effectively answer all of your product or order questions. .

Leave a message