C&N HUITONG limited are leading steel pipe,fitting and flange Supplier since 1997.
Phone: +86-0317-6287569     E-mail: alloypipefitting@gmail.com

Fasteners/

ASTM B150 UNS C63000 Nickel Aluminium Bronze Stud Bolt & Hex Nut,UNS C63000 Stud bolt

Bronze Bolts B150 C63000 Aluminum Bronze Stud Bronze Bolt B150 C63000 Aluminum Bronze Stud Bolts C63000 / AMS4640 ASTM B150 UNS C63000 / AMS4640 is one of the most commonly used American grades of nickel aluminium bronze. Containing around 10% aluminium, 5% nickel and 3% iron the alloy offers an inherent high strength and hardness combined with a very good toughness and an excellent resistance to wear, shock and abrasion. The C63000 / AMS4640 also offers a very good corrosion, erosion and cavitation resistance in seawater and brackish water together with a good resistance to dilute sulphuric, hydrochloric and non-oxidising acids. It also has a very good galling resistance and also offers a high retention of mechanical properties at elevated…

  • Product Details

C63000 / AMS4640

ASTM B150 UNS C63000 / AMS4640 is one of the most commonly used American grades of nickel aluminium bronze. Containing around 10% aluminium, 5% nickel and 3% iron the alloy offers an inherent high strength and hardness combined with a very good toughness and an excellent resistance to wear, shock and abrasion.

The C63000 / AMS4640 also offers a very good corrosion, erosion and cavitation resistance in seawater and brackish water together with a good resistance to dilute sulphuric, hydrochloric and non-oxidising acids. It also has a very good galling resistance and also offers a high retention of mechanical properties at elevated temperatures.

C63000 Aluminium bronze offers excellent corrosion resistance and has been used in many applications.

Typically used in maring applications and corrosion environments. Our aluminium bronze studs include as follows: Material :C61900,C62300,C63000,C63280 C64200 Aluminium bronze alloy from ISO certificated source.

Manufacturing standards:DIN,IFI,BS,etc. free sample can be provided

Main specs:1/2″ – 2″  or M10 – M52.

Length is customized

ASTM B150/B150M-19

Standard Specification for Aluminum Bronze Rod, Bar, and Shapes

Abstract

This specification establishes the requirements for rods, bars, and shapes of aluminum bronze with Copper Alloy UNS Nos. C61300, C61400, C61900, C62300, C62400, C63000, C63020, C63200, C64200, and C64210. Products shall be produced in tempers HR50, M10, M20, M30, O20, O25, O30, O32, TQ30, TQ50 and TQ55. And it shall be tested and shall conform to dimensional (mass, diameter, length, thickness, straightness, and edge contour), mechanical (tensile and yield strength, Rockwell hardness, and elongation), and chemical composition requirements. Products should also meet requirements under mercurous nitrate test, ammonia test, and piston finish.

UNS C63000 Stud bolt Chemical Requirements

Composition, %
Copper and Copper Base Alloys
UNS DesignationAlloyGeneral NameAluminumCopper, minIron, maxManganese, maxNickel, maxPhosphorusSiliconZinc, maxALead, maxTinArsenic, max
C63000630Aluminum Bronze9.0 – 11.078.0D2.0 – 4.01.504.0 – 5.50.25 max0.20 max

A  Elements shown as balance shall be arithmetically computed by deducting the sum of the other named elements from 100.
B  Copper plus specified elements = 99.8 min; copper plus silver = 88.5-91.5.
C  Cobalt is to be counted as nickel
D  Minimum content of copper plus all other elements with specified limits shall be 99.5%.
E  An alloy containing as high as 2.5% silicon is acceptable provided the sum of all the lements other than copper, silicon and iron does not exceed 0.30 %.

UNS C63000 Stud bolt Equivalent Specification

CDAASTMSAEAMSFederalMilitaryOther
C63000B150
B150M
J461
J463
4640QQ-C-465B AMD1

UNS C63000 Stud bolt Chemical Composition

Cu%1Sn%Zn%Fe%Ni%Al%Mn%Si%
Rem.0.200.302.00-
4.00
4.00-
5.50
9.00-
11.00
1.500.25
Chemical Composition according to AMS 46401Cu value includes Ag.Note: Cu + Sum of Named Elements, 99.5% min. Single values represent maximums.

Machinability

Copper Alloy UNS No.Machinability RatingDensity (lb/in3 at 68 °F)
C63000300.274

click to preview more information:

HOW to order our ASTM B150 UNS C63000 Stud bolt?

BOLT, STUD ( FULLY THRD ) + 2 NUTS 5/8″ X 90 MM ASTM B150 UNS C63000 ASME B18.2.1/18.2.2

Prev:

Next:

Leave a Reply

Leave a message