Standard Specification For Alloy Steel ASTM A182 F11 Industrial Flanges
Specifications : ASTM A182 / ASME SA182
Dimensions : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
Size : 1/2″ to 36″
Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
slip-on-flange
ASTM A182 F11 Alloy Steel Pipe Flanges
Forged and Plate Flanges
Products
Size
ASTM A182 Alloy Steel F9 Slip-On Flanges
ASTM A182 Alloy Steel F9 Threaded Flanges
Sizes 1/8″ – 36″ Raised Face or Flat Face
ASTM A182 Alloy Steel F9 Weld Neck Flanges
ASTM A182 Alloy Steel F9 Socket Weld Flanges
ASTM A182 Alloy Steel F9 Blind Flanges
ASTM A182 Alloy Steel F9 Reducing Flanges
ASTM A182 Alloy Steel F9 Lap Joint Flanges
ASTM A182 Alloy Steel F9 Plate Flanges
ASTM A182 Alloy Steel F9 Orifice Flanges
ASTM A182 Alloy Steel F9 Forged Flanges
ASTM A182 Alloy Steel F9 Ring Type Joint Flanges
ASTM A182 Alloy Steel F9 Square Flanges
Alloy Steel F11 Flange Standards / Types And Pressure Class :
ASME/ANSI B 16.5
Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange
PRESSURE CLASS
150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47
Welding Neck Flange, Blind Flange [Series A & B]
PRESSURE CLASS
75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36
Welding Neck Flange, Slip on Flange, Threaded Flange
PRESSURE CLASS
300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1
Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange
PRESSURE CLASS
PN 2.5 TO PN 40
BS 4504[PART 1]
Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange
All our pipe fitting and flange shipped with proper packing protection, and our factory with good experience on special products like polished pipe packing ,FBE coated fitting and pipe packing, oversizes fitting up to 3500mm packing&shipping.
Common shipping and packing for our products
Item
Producs
Dimension
Surface
Packing method
Shipping method
Remark
1
Flange
below 60in
varnish oil
wooden case
sea/air
2
Flange
over 60in
varnish oil
wooden pallet/steel frame
sea/air
For OD over 2.3m
3
Fitting
below 24in
varnish oil
wooden case/pallet
sea/air
4
Fitting
over 24in
black painting
wooden case/pallet
sea/air
5
Fitting
over 24in
black painting
Nude packing
Bulk vessel
For OD over 2.32m
6
Pipe
Below 8in
bundle
Woven bag/wooden case
sea/air
7
Pipe
over 8in
single piece
Woven bag/wooden case
sea/air
8
Gasket
all sizes
Cartons/wooden case
sea/air
9
Fastener
all sizes
Cartons/wooden case
sea/air
Also we can fulfill customized packing and delivery requirements. some of our products packing pictures as below
Table ANSI, ASME, ASA, B16.5 150lb/sq.in. Plate Ring Flange RF
ø
D
b
g
m
J
k
Holes
l
Kg.
1/2″
88,9
11,1
34,9
30,2
22,3
60,3
4
15,9
0,400
3/4″
98,4
12,7
42,9
38,1
27,7
69,8
4
15,9
0,700
1″
107,9
14,3
50,8
49,2
34,5
79,4
4
15,9
0,800
1 1/4″
117,5
15,9
63,5
58,8
43,2
88,9
4
15,9
1,100
1 1/2″
127,0
17,5
73,0
65,1
49,5
98,4
4
15,9
1,400
2″
152,4
19,0
92,1
77,8
62,0
120,6
4
19,0
2,200
2 1/2″
177,8
22,2
104,8
90,5
74,7
139,7
4
19,0
3,600
3″
190,5
23,8
127,0
107,9
90,7
152,4
4
19,0
4,100
3 1/2″
215,9
23,8
139,7
122,2
103,4
177,8
8
19,0
5,200
4″
228,6
23,8
157,2
134,9
116,1
190,5
8
19,0
5,600
5″
254,0
23,8
185,7
163,6
143,8
215,9
8
22,2
6,300
6″
279,4
25,4
215,9
192,1
170,7
241,3
8
22,2
7,500
8″
342,9
28,6
269,9
246,1
221,5
298,4
8
22,2
12,600
10″
406,4
30,2
323,8
304,8
276,3
361,9
12
25,4
18,500
12″
482,6
31,7
381,0
365,1
327,1
431,8
12
25,5
28,000
14″
533,4
34,9
412,7
400,0
359,1
476,2
12
28,6
36,000
16″
596,9
36,5
469,9
457,2
410,5
539,7
16
28,6
46,000
18″
635,0
39,7
533,4
504,8
461,8
577,8
16
31,7
50,000
20″
698,5
42,9
584,2
558,8
513,1
635,0
20
31,7
64,000
22″
749,3
46,0
641,2
609,6
564,4
692,1
20
34,9
72,000
24″
812,8
47,6
692,1
663,6
615,9
749,3
20
34,9
89,000
NOTE: 1. Class 150 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3). 2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees. 3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub. 4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C). 5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.
NOTE: 1. Class 300 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3). 2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees. 3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub. 4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C). 5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.
NOTE: 1. Class 600 flanges except Lap Joint will be furnished with 0.25 (6.35mm) raised face, which is not included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3). 2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees. 3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub. 4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C). 5. Dimensions of sizes 1/2 through 3 1/2 are the same as for Class 400 Flanges. 6. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.
Easy to enjoy our service by scan the follow Frequently Asked Questions
Q: What kind of material does HONGCHENG supply?
HONGCHENG generally specializes in alloy steel and specialty alloys. Some of these specialty alloys include Alloy 20, Duplex Alloys, Nickel Alloys such as various grades of Hastelloy (C276, C22), Aluminum, Chrome Moly ASTM A/ASME SA 335 P1, P2, P5, P9, P11, P12,P22, P23, P91, and P92. we also offer bending,CNC machining, coating service.
Q. What the define of pipe fittings? Pipe fitting is the occupation of installing or repairing piping or tubing systems that convey liquid, gas, and occasionally solid materials. This work involves selecting and preparing pipe or tubing, joining it together by various means, and the location and repair of leaks. Pipe fitting work is done in many different trades: Plumbing, HVAC, manufacturing, fire prevention, and many others. Pipe fitters (sometimes called simply “fitters”) are represented in the USA by the United Association of Journeymen and Apprentices of the Plumbing and Pipe Fitting Industry of the United States and Canada. Fitters work with a variety of pipe and tubing materials including several types of plastic, copper, steel, iron, aluminium, clay, and lead.
Q. What should I consider for buying pipe fittings? A. Material, Size, Temperature and Pressure Ratings, Durability, Standards,surface coating etc.
Q. What are threaded fittings? A. Thread fitting is the fitting with thread concetions,the regular screw standards are NPT and BSP.NPT is a U.S. standard for tapered threads used to join pipes and fitting and BSP is a family of standard screw thread types that has been adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.
Q. The define of flange? A. A flange is usually in the shape of a plate or ring which forms a rim at the end of a pipe when fastened to the pipe our factory can produce single forge base over 8000kg.
Q.Do you provide Material Test Reports (MTR’s) ? Relevant documents according to inspection test plan will be provide along with goods.
Q.What is a standard used in pipe fittings? A. Standards are certain authentication given in reference to manufacture and installation of the product . Some common standards are BSP, NPT, ANSI, ASME etc
Q. My questions is not answered in this FAQs section, what do I do now? A: Simply call us or email us at info@alloysteelfitting.com and we will do our best to effectively answer all of your product or order questions. .
C&N Industiral,huitong limtied is professional pipe,flange and fitting manufacturer,our products approved by PDO, SADARA, SWCC,PDO etc.
