C&N HUITONG limited are leading steel pipe,fitting and flange Supplier since 1997.
Phone: +86-0317-6287569     E-mail: alloypipefitting@gmail.com

Fasteners/

42CrMoA anchor bolt, 34CrNiMo6 10.9 anchor Bolt

We are a professional manufacturer of 42CrMoA anchor bolt,34CrNiMo6 10.9 anchor Bolt,,wind foundation anchor bolts. A193 B7 Anchor bolt M36 M39 Anchor Bolt M48 Anchor,M56 anchor bolts 42CrMoA anchor bolt A193 B7 Anchor bolt Hot DIP Galvanized Carbon Steel Ground Roof Concrete Foundation Type J Anchor Bolt Anchor bolts Anchor cage is composed by anchor bolts, 2 anchor plates(templates)-upper template(temporary template, upper anchor bolt), lower template(lower anchor bolt), Steel Nuts, seal nut(nylon nut), Washers(gaskets), adjusting feet assemblies, splice plates(connecting plates), PVC tubes, corrosion protecting grease, fabric,HDPE bolt caps(bolt hat) etc. Anchor bolts are the most important part in this assemblies in WTGS(wind turbine generator system) since this part will bear the pre-stress, pre-tensioning forces, and take responsibility for the stability of…

  • Product Details

We are a professional manufacturer of 42CrMoA anchor bolt,34CrNiMo6 10.9 anchor Bolt,,wind foundation anchor bolts.

A193 B7 Anchor bolt

M36 M39 Anchor Bolt

M48 Anchor,M56 anchor bolts

Anchor bolts

Anchor cage is composed by anchor bolts, 2 anchor plates(templates)-upper template(temporary template, upper anchor bolt), lower template(lower anchor bolt), Steel Nuts, seal nut(nylon nut), Washers(gaskets), adjusting feet assemblies, splice plates(connecting plates), PVC tubes, corrosion protecting grease, fabric,HDPE bolt caps(bolt hat) etc.

Anchor bolts are the most important part in this assemblies in WTGS(wind turbine generator system) since this part will bear the pre-stress, pre-tensioning forces, and take responsibility for the stability of the whole turbine or tower. Our manufacturer have the most advanced facility of heat-treatment of steel round bars, which means the pre-stress bearing capacity, tensile strength, yield strength abilities are much higher than the international standard.

We produce 42CrMoA anchor bolts ,stud bolts for wind turbine foundation anchor cages. 42CrMoA is a high level alloy steel grade of  china standard, which equal to 

We produce 42CrMoA steel bolts for wind turbine foundation anchor cages. 42CrMoA is a high level alloy steel grade of GB standard, which equal to 34CrNiMo6 and A193 B7  .  mill test certificate of 42CrMoA will be provided.

Property Class:  8.8  9.8  10.9  12.9

Diameter :  M16 to M56

Tensile Strength :  860 MPa, 900MPa, 1040Mpa, 1220Mpa , or according to client’s requirements.

Yield strength :  600 MPa, 650 MPa, 830 MPa, 970 MPa, or according to client’s requirements.

-40 ℃ Impact energy: higher than 27J

Rockwell Hardness HRC: 23 to 44, or according to client’s requirements.

Mechanical properties

GradeDiaTensile
Strength
Rm/MPa
2%
Elongation
Limit RP
0.2/MPa
Stress Under
Proof Load SPf/MPa
Elongation after
fracture A/%
Reduction oF Area after Fracture Z/%Rockwell Hardness
/HRC
Bolt Length
mm
-40 ℃ Impact
Absorb Energy
K/J
minmaxmax
8.8M16
~M56
830660600125223341200027
9.890072065010482837
10.910409408309483239
12.9122011009708443944
34CrNiMo6 bolt

Prev:

Next:

Leave a Reply

Leave a message